Marque : The Modal Shop
-
MCS-H005
Calibration of 086 series instrumented hammer or similar, NIST traceable. A2LA accredited. Includes data for up to six tips and one extender mass if provided.
Publié le
-
MCS-H002
Calibration of 086 series instrumented hammer or similar, NIST traceable. A2LA accredited. Includes data for default hammer tip and one extender mass if provided.
Publié le
-
MCS-E013
Calibration of Models 443B101, 443B102, 443B01, and 443B02 dual-mode charge amplifiers, NIST traceable. A2LA accredited.
Publié le
-
-
MCS-A001-A004-61T
Calibration of accelerometer, triaxial amplitude and phase response from 0.5 Hz to upper 5% frequency, NIST traceable. A2LA accredited. Also includes DC sensitivity calibration (not A2LA accredited).
Publié le
-
MCS-A001-A004-61
Calibration of accelerometer, single axis amplitude and phase response from 0.5 Hz to upper 5% frequency, NIST traceable. A2LA accredited. Also includes DC sensitivity calibration (not A2LA accredited).
Publié le
-
MCS-A001-61T
Calibration of accelerometer, triaxial amplitude and phase response from 5 Hz to upper 5% frequency, NIST traceable. A2LA accredited. Also includes DC sensitivity calibration (not A2LA accredited).
Publié le
-
MCS-A001-61
Calibration of accelerometer, single axis amplitude and phase response from 5 Hz to upper 5% frequency, NIST traceable. A2LA accredited. Also includes DC sensitivity calibration (not A2LA accredited).
Publié le
-
MCS-63
Recalibration and conformance check of TMS 9917C Microphone Comparison Calibrator. Verifies performance of frequency response, sound pressure level, and harmonic distortion with respect to original product specifications.
Publié le
-
MCS-55
A2LA Accredited Accelerometer Calibration Service, primary calibration using laser interferometry per ISO16063-11 from 0.5 Hz to 20 kHz at up to 45 specific, user-defined frequencies. Includes data on disk.
Publié le
-
-
M2000X14
Head expander for the 2500E shaker. Lightweight 9.5 kg (21 lb) magnesium made, 12 x 12 x 4 in (305 x 305 x 102 mm) square, with 25 mounting holes (M6) evenly spaced 2.5 in (63.5 mm) apart.
Publié le
-
LT2-CERT
LaserTach LT2 Factory Conformance Check. Includes General Certificate of Conformance.
Publié le
-
KP080A199C/482/830
Armature insert kit. Includes ceramic armature insert with 10-32 UNF mounting thread, internal reference accelerometer, and 482 type signal conditioner. For use with air bearing shaker 396C10. Calibrated with primary method from 5 to 15,000 Hz.
Publié le
-
K9919C
Stand-alone, turnkey microphone comparison calibration system. Includes PC controller, data acquisition card, pre-installed software, reference microphones, cables and mounting accessories. Operates from 20 Hz to 20 kHz per IEC 61094-5
Publié le
-
K9535C
Stand-alone, turnkey Automated shock calibration system, using the 9535C shock controller. System includes PC controller, data acquisition card, measurement software with database, PCB reference accelerometer, cables and mounting accessories.
Publié le